Keithley Multimeter Digital
Keithley DMM7512 — Multimeter 7,5 Digit Dual Channel
Keithley DMM7512 Series · Multimeter Digital
Spesifikasi Utama
- Channels2
- Range10 nV – 1000 V 0.1 µΩ - 1 GΩ 1 pA - 3 A
- Best Accuracy (1-Year)14 ppm 24 ppm 60 ppm
- Measurement Speed/Channel0.0005 NPLC (Integrating A/D) 1 Msample/s (Digitizing A/D)
Gambaran Umum
Multimeter dual-kanal 7,5 digit untuk pengukuran paralel berkecepatan tinggi — mengukur dua sinyal secara bersamaan dengan akurasi tinggi pada satu instrumen.
Spesifikasi
| Channels | 2 |
| Range | 10 nV – 1000 V 0.1 µΩ - 1 GΩ 1 pA - 3 A |
| Best Accuracy (1-Year) | 14 ppm 24 ppm 60 ppm |
| Measurement Speed/Channel | 0.0005 NPLC (Integrating A/D) 1 Msample/s (Digitizing A/D) |
Aplikasi
Keithley Keithley DMM7512 Series — aplikasi utama dari pabrikan:
Two DMM7510s built into one compact enclosure
The DMM7512 consists of two, independent, identical, 7½-digit DMM7510 digital multimeters (DMMs) with a few less measurement functions. The two DMM7512 DMMs have the same accuracy, sensitivity, and speed as the DMM7510 so that the DMM7512 can be seamlessly integrated…
- Sample complex waveforms with the 1Msample/s, 18-bit digitizer; store up to 27.5 million readings
- Test components used in low power circuits with 0.1 µΩ and 1 pA sensitivities
- Maximize test quality with high test uncertainty ratios using 1-year accuracy DC volts as good as 14 ppm
- Built-in Test Script Processor (TSP ® ) enables test sequence execution without controller interaction, reducing test time and communication overhead, while availing the controller for other tasks
Double Test System Density
Save valuable rack space with two DMMs in a 1U high rack space. Compared to two 2U high DMM7510s, you can get twice the measurement capability in half the space.
- Combine sourcing and measurement with the 2606B High Density, 4-channel Source Measure Unit (SMU) and the DMM7512 for four channels of sourcing and two channels of measurement in as little as 2U of rack space
- No extra spacing for thermal management is required between either DMM7512s or 2606Bs
Significantly Reduce Test Time
The two DMMs in each DMM7512 have built-in intelligence to execute test programs without PC interaction using its Test Script Processor (TSP ® ) Technology. In addition, each DMM features a TSP-Link ® hardware interface so that one instrument can…
- Control up to 32 instruments in a TSP-Link test system
- Synchronize measurements with a latency under 500 ns
- Eliminate time-consuming communications between the instruments and a PC
- DMM7512 TSP code is compatible with DMM7510 TSP code
Determine power consumption
Use the two DMMs of the DMM7512 to independently capture dynamic battery drain current and battery voltage and compute power consumption of low power, wireless IoT, and implantable/portable medical products, a critical parameter for battery-operated devices.
- Capture current and voltage waveforms with up to 1 Msample/s, 18-bit digitizing
- Synchronize waveform capture using TSP-Link with less than 500 ns latency between initiation of waveform sampling
- Measure low sleep mode current with 1pA DCI sensitivity or 0.1nA current digitization sensitivity
Increase throughput with multi-device testing
Use the two DMMs in a DMM7512 to test two devices-under-test (DUTs) to double test throughput and maximize test system capacity. Or, use multiple DMM7512s and test even more DUTs with one test system. Save on the number of test…
- 1U rack height with no spacing between instruments required
- Two DMMs per instrument
- Control multiple instruments with a test script and TSP-Link to reduce bus communication time and save test time
Produk Terkait
Butuh Penawaran?
Kirim kebutuhan Anda — tim kami merespons cepat pada jam kerja (Senin–Jumat, 08.30–17.30 WIB).