Genesys 2 AMD Kintex™ 7 FPGA Development Board

The Genesys 2 is a high-performance, ready-to-use FPGA development board built around the AMD Kintex™ 7 FPGA. The Genesys 2 is a powerhouse for data and video processing applications, but offers a variety of peripherals making it a great solution for a wide array of projects.
Everything needed for robust multimedia applications is already available on the board: DisplayPort connectors, HDMI sink and source, 16-bit VGA, 128×32 pixel OLED screen, and an audio codec with four 3.5mm jacks. One can quickly get started with A/V, image processing, or other multimedia applications without needing additional hardware.
Working on other applications, or looking for more customizability? The Genesys 2 also offers five Pmod ports and a fully populated FMC HPC connector, which provide limitless expansion options. Additionally, the 10/100/1000 Ethernet, USB 2.0, and a USB HID host for mice and keyboards make the Genesys 2 easily integrated with other systems.
The powerful AMD Kintex™ 7 XC7K325T-2FFG900C will have no trouble keeping up with your designs made in Vivado Design Suite or ISE. The free Standard Edition of the AMD Vivado™ Design Suite does not support the Kintex-7 325T, but a voucher is provided for Vivado Enterprise Edition at no extra cost.
Guides and demos are available to help users get started quickly with the Genesys 2. These can be found through the Support Materials tab.
To view our EMC Disclaimer, click here.

The Genesys 2 offers a robust collection of ports and peripherals, including:

Fully-populated 400-pin FMC HPC connector w/ ten GTX lanes
USB-UART Bridge
128×32 pixel OLED
16-bit VGA connector
Pmod connector for XADC signals
Two four-lane DisplayPort connectors
HDMI Sink and HDMI Source
10/100/1000 Ethernet PHY
1 GB 1800 MT/s on-board DDR3
USB 2.0 Host/Device/OTG PHY
Dedicated USB port for JTAG programming and data transfers
Micro SD card connector
Audio codec w/ four 3.5mm jacks
Serial Flash
Five Pmod ports
USB HID Host for mice, keyboards and USB MSD Host for storage

On-board FPGA: AMD Kintex™ 7 FPGA (XC7K325T-2FFG900C)

50,950 logic slices, each with four 6-input LUTs and 8 flip-flops
16 Mbits of fast block RAM
Ten clock management tiles, each with a phase-locked loop (PLL)
840 DSP slices
Internal clock speeds exceeding 450MHz
On-chip analog-to-digital converter (XADC)
Up to 10.3125Gbps gigabit transceivers
1800Mbps DDR3 data rate with 32-bit data width
Commercial -2 speed grade

Product Compliance: 

HTC: 8471500150
ECCN: 5A992.c

Genesys 2 AMD Kintex™ 7 development board
Digilent custom cardboard box with protective foam
USB A to Micro-B programming cable and one 12V, 3A wall power supply with US and EU adapters – UK plug adapter not included
Vivado Design Suite voucher

To create and modify designs for your Genesys 2, you can use AMD's Vivado Design Suite. Vivado is a software designed for the synthesis and analysis of HDL designs. The Genesys 2 is not supported by the free Standard edition of the AMD Vivado™  Design Suite, but a voucher is provided with the board at no additional cost.
If you are continuing work on an old design, you can also use ISE, a legacy design tool from AMD for synthesis and analysis of HDL designs.
Note: AMD software tools are not available for download in some countries. Prior to purchasing the Genesys 2, please check the supporting software's availability, as it is required for the board's use.

Quickly find what you need to get started and reduce mean time to blink.
All product support including documentation, projects, and the Digilent Forum can be accessed through the product resource center.
Resource Center
Quick Links
Reference ManualSchematic

Aplikasi & Use Case: Genesys 2 AMD Kintex™ 7 FPGA Development Board dirancang untuk pengembangan prototipe logika digital berbasis FPGA/SoC, pemrosesan sinyal digital (DSP), pengujian arsitektur prosesor sistem tertanam, serta laboratorium pendidikan teknik komputer dan robotika.