BNC Oscilloscope x1/x10 Probes (Pair)

BNC Probes offer the best signal integrity and highest available bandwidth for connecting an Oscilloscope to a circuit under test and are the standard in the industry. This set of BNC probes features two BNC cables terminated by contraction hook type oscilloscope probes. Both cables are rated for 6 MHz at 1X attenuation, and 100 MHz at 10x attenuation. This pair of BNC-terminated oscilloscope probes, has been selected for use with the Analog Discovery in conjunction with the BNC Adapter for the Analog Discovery or with the Analog Discovery Studio.

BNC-terminated
Selectable 1X/10X input attenuation
Contraction hook tip
12cm ground clip
Localization sleeve adapts to IC testing
Input resistance:

1x1MΩ
10x10MΩ

Input capacitance:

1x 70pF – 120pF
10x 13pF – 17pF

Bandwidth:

1x DC-6MHz
10x DC-100MHz

Product Compliance: 

HTC: 9030908911
ECCN: 3A992.a

Safety Notice:The specifications provided apply to the oscilloscope probes only. When using these probes with a Test and Measurement device, always check the specifications of the device itself to ensure voltage limits are not exceeded. Failure to do so may result in equipment damage or safety risks.

Pair of BNC oscilloscope probes
Six plastic color bands
Two plastic probe covers
Two grounding clips
One contraction hook clip

Quickly find what you need to get started.
Datasheet

Aplikasi & Use Case: BNC Oscilloscope x1/x10 Probes (Pair) mendukung kebutuhan integrasi sistem pengujian, aksesori pengukuran laboratorium, dan pemrosesan sinyal pada fasilitas riset dan industri.