Eclypse Z7 Enclosure Kit

Protect your investment and give your hardware a sleek, professional appearance with the Eclypse Z7 Enclosure Kit. Machined from black anodized aluminum, the Eclypse Z7 Enclosure Kit provides a sturdy housing for your Eclypse platform hardware.
The front panel of the enclosure provides a power switch and fan as well as access to the Eclypse Z7's status LEDs, power supply connection, microSD card slot, and OTG, JTAG, UART, and Ethernet connections. The rear panel exposes connections to the four SMA connectors of two Zmods installed on the Eclypse Z7 board and the board's 2×6 Pmod connectors. Assembly is required; directions can be found here.
Assembly instructions and STP 3D model files are available under the Support Materials tab.

The following parts are included in the Eclypse Z7 Enclosure Kit. Assembly is required.

Aluminum enclosure
Zmod faceplate
Main interface faceplate
2x end caps
Fan
Power switch
8x Enclosure screws (Thread cutting, #6×3/8”)
2× Fan screws (Thread forming, M3x12mm)
8× Zmod screws (M3x5mm)

Product Compliance:

HTC: 8473305100
ECCN: EAR99

Assembly InstructionsEnclosure Kit STP 3D Model

Aplikasi & Use Case: Eclypse Z7 Enclosure Kit mendukung kebutuhan integrasi sistem pengujian, aksesori pengukuran laboratorium, dan pemrosesan sinyal pada fasilitas riset dan industri.