Transistor Tester for Analog Discovery: Enables Characteristic Curve Tracing for Diodes and Transistors

The curve tracer instrument in WaveForms allows several of the Discovery family of devices to draw characteristic curves of common devices like diodes, NPN and PNP transistors, and both P- and N-type FETs. The Transistor Tester can be plugged into the Analog Discovery and enable the use of this instrument without any need for reference circuit set ups, similar to a traditional curve tracer instrument. However unlike traditional curve tracer instruments, WaveForms runs on a computer, readily providing measurements, cursors and screenshots that can be taken with the click of a button. This is extremely convenient for lab reports, and much more accurate than a photo of a display. 
When using the Analog Discovery and Transistor Tester and adapter is selected, the curve tracer instrument provides the appropriate reference resistors and can be used to easily plot the characteristic curves and add cursors to take the necessary measurements. The Adapter is loaded with a 2×15 female connector which can be plugged directly into the analog Discovery. Components or leads can be attached via the terminal block on the Transistor Tester. 

Works with diodes, NPN and PNP transistors, and P- and N-Type FETs
Connector J2 for E / C / B / E connections
10 kΩ Internal Resistor for Rb
100 Ω Internal Resistor for Rc
Compatible with the Analog Discovery 3, Analog Discovery 2, and Analog Discovery (Legacy)
2×15 Analog Discovery connector

Product Compliance: 

HTC: 8473301180
ECCN: EAR99

Analog Discovery Transistor Tester
Custom Anti-Static Packaging

The resource center for the Transistor Tester is the central hub of technical content for the device, and contains everything to get started and reduce mean time to test. This includes a getting started guide, documentation, tutorials, example projects and a link to technical support. 
Resource Center

Aplikasi & Use Case: Transistor Tester for Analog Discovery: Enables Characteristic Curve Tracing for Diodes and Transistors digunakan untuk pengujian dan validasi sinyal campuran (mixed-signal) pada laboratorium riset, pengujian otomatis sistem tertanam (embedded systems), serta modul praktikum teknik elektro dan otomatisasi industri.