Katalog › Accelerometer › CTC MEB210 Lightweight, Cost Effective Molded Sensor, Top Exit Molded Integral Cable, 10-32 Mounting, 100 mV/g, ±10% | Akselerometer

CTC

CTC MEB210 Lightweight, Cost Effective Molded Sensor, Top Exit Molded Integral Cable, 10-32 Mounting, 100 mV/g, ±10% | Akselerometer

Accelerometer molded MEB210 dengan sensitivitas 100 mV/g dan respons frekuensi hingga 15 kHz untuk pemantauan getaran mesin.

CTC MEB210 Lightweight, Cost Effective Molded Sensor, Top Exit Molded Integral Cable, 10-32 Mounting, 100 mV/g, ±10% | Akselerometer

MEB210 adalah accelerometer molded dengan sensitivitas 100 mV/g dan respons frekuensi 0.5 Hz hingga 15 kHz pada sumber tegangan 18-30 VDC. Kabel integral molded top exit terpasang permanen dengan mounting 10-32. Spesifikasi utamanya mencakup dynamic range ±80g peak (Vsource ≥ 22V, 12Vbias), sensitivitas transversal ≤5%, settling time < 2 detik, dan eksitasi arus konstan 2-10 mA.

Fitur Utama

  • Accelerometer dengan overmold nilon
  • Untuk mounting dengan adhesive mounting pad, CTC merekomendasikan MH108-3B (1/4-28 to 10-32 Adapter Stud) bersama MH130-4A (0.75" OD Mounting Disk with 1/4-28 Blind Tapped Hole)

Spesifikasi

Part NumberMEB210 / M/MEB210
Sensitivity (±10%)100 mV/g
Frequency Response (±3dB)30-900,000 CPM / 0.5 Hz-15 kHz
Frequency Response (±10%)60-600,000 CPM / 1 Hz-10 kHz
Dynamic Range± 80g, peak *Vsource ≥ 22V, 12Vbias
Transverse Sensitivity≤5%
Settling Time< 2 Seconds
Voltage Source18-30 VDC
Constant Current Excitation2-10 mA
Spectral Noise @ 10 Hz30 µg/√Hz
Spectral Noise @ 100 Hz4 µg/√Hz
Spectral Noise @ 1000 Hz2 µg/√Hz
Output Impedance< 100 ohm
Bias Output Voltage10-14 VDC
Case Isolation>10 8 ohm
Operating Temperature Range-58 to 250 °F / -50 to 121 °C
Maximum Shock Protection10,000 g, peak
Electromagnetic SensitivityCE Approved
SealingIP68 Integrally Molded Cable
Submersible Depth200 ft. / 61 m
SIL RatingSIL 2
Sensing ElementPZT Ceramic
Sensing StructureShear Mode
Weight0.35 oz / 10 grams
Mounting Base316L Stainless Steel
Mounting Thread10-32 UNF
Cable Jacket Diameter0.14 in (3.6 mm)
Cable Jacket MaterialPolyurethane
Cable Conductor26 AWG Twisted Shielded Pair
Resonant Frequency2,640,000 CPM / 44 kHz
Mounting Torque1.5 - 2.5 ft. lbs / 2,0 to 3,4 Nm
Mounting Hardware Supplied10-32 Stud / M5 Stud
Calibration CertificateCA10

Aplikasi

Pengujian Suara & Getaran (Sound & Vibration)

Pengujian suara & getaran (sound and vibration) mengukur respons mekanik dan akustik produk terhadap guncangan, getaran frekuensi rendah, dan kebisingan — kunci untuk NVH otomotif, reliabilitas elektronik, dan integritas struktur dirgantara.

Lihat solusi aplikasi →

IIoT & Monitoring Industri — Industrial IoT & Condition Monitoring

Sistem Industrial Internet of Things (IIoT) dan condition monitoring untuk mengumpulkan, merekam, dan menganalisis data mesin, energi, suhu, getaran, arus, serta proses secara berkelanjutan.

Lihat solusi aplikasi →

Penggunaan Produk

Gunakan MEB210 untuk pengukuran getaran pada mesin rotasi dengan mounting 10-32 dan kabel integral molded.

Unduhan & Sumber

Butuh konsultasi teknis?

Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.

Produk Terkait

Referensi

https://www.ctconline.com/products/ctc-line/industrial-accelerometers/molded-sensors/?prd=MEB210

Scroll to Top
WhatsApp