CTC
CTC TXFA333-VE Low Cost, Low Frequency, Piezo Velocity Triaxial Sensor, Side Exit 4 Pin Connector, Follows Cartesian Phase Coordinate System, 500 mV/in/sec, ±15% | Sensor Kecepatan Getaran
Sensor piezo velocity triaxial low frequency low cost CTC TXFA333-VE, 500 mV/in/sec ±15%, 1-4,5 kHz.

TXFA333-VE mengintegrasikan ke velocity di dalam sensor dengan sensitivitas 500 mV/in/sec ±15%. Respons 1 Hz-4,5 kHz (±3dB) dan dynamic range ±10 in/sec pk tersedia pada body triaxial side exit 4 Pin Connector.
Fitur Utama
- Integrasi ke Velocity dilakukan di dalam sensor
- Opsi exit Mini-MIL kompatibel dengan konektor Mini-MIL CTC J Series
- Opsi exit M12 kompatibel dengan konektor CTC M4 Series
Spesifikasi
| Part Number | TXFA333-VE / M/TXFA333-VE |
|---|---|
| Sensitivity (±15%) | 500 mV/in/sec |
| Frequency Response (±3dB) | 60 to 270,000 CPM / 1 Hz to 4.5 kHz |
| Dynamic Range | +-10 in/sec pk *Vsource ≥ 22V, 12Vbias |
| Transverse Sensitivity | ≤5% |
| Voltage Source | 18-30 VDC |
| Constant Current Excitation | 2-10 mA |
| Spectral Noise @ 10 Hz | 200 µ IPS/√Hz |
| Spectral Noise @ 100 Hz | 6 µ IPS/√Hz |
| Spectral Noise @ 1000 Hz | 0.7 µ IPS/√Hz |
| Bias Output Voltage | 10-14 VDC |
| Case Isolation | >10 8 ohm |
| Operating Temperature Range | -58 to 250 °F / -50 to 121 °C |
| Maximum Shock Protection | 5,000 g, peak |
| Electromagnetic Sensitivity | CE |
| Sealing | Welded, Hermetic |
| Sensing Element | PZT Ceramic |
| Sensing Structure | Shear Mode |
| Weight | 13.4 oz / 380 grams |
| Case Material | 316L Stainless Steel |
| Connector (Non-Integral) | 4 Pin Mini-MIL or 4 Pin M12 |
| Resonant Frequency | 720,000 CPM / 12 kHz |
| Mounting Torque | 2 to 5 ft. lbs / 2,7 to 6,8 Nm |
| Mounting Hardware Supplied | 1/4-28 Captive Bolt / M6x1 Captive Bolt |
| Calibration Certificate | CA10 |
Aplikasi
Pengujian Suara & Getaran (Sound & Vibration)
Pengujian suara & getaran (sound and vibration) mengukur respons mekanik dan akustik produk terhadap guncangan, getaran frekuensi rendah, dan kebisingan — kunci untuk NVH otomotif, reliabilitas elektronik, dan integritas struktur dirgantara.
Lihat solusi aplikasi →IIoT & Monitoring Industri — Industrial IoT & Condition Monitoring
Sistem Industrial Internet of Things (IIoT) dan condition monitoring untuk mengumpulkan, merekam, dan menganalisis data mesin, energi, suhu, getaran, arus, serta proses secara berkelanjutan.
Lihat solusi aplikasi →Penggunaan Produk
Gunakan TXFA333-VE untuk pengukuran velocity triaxial ekonomis pada mesin berputar lambat.
Unduhan & Sumber
Butuh konsultasi teknis?
Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.




