Katalog › Velocity Sensor › CTC VE135 Piezo Velocity Sensor, Top Exit 2 Pin Connector, 500 mV/in/sec, ±10% | Sensor Kecepatan Getaran

CTC

CTC VE135 Piezo Velocity Sensor, Top Exit 2 Pin Connector, 500 mV/in/sec, ±10% | Sensor Kecepatan Getaran

Sensor piezo velocity CTC VE135, 500 mV/in/sec, top exit 2 Pin Connector, 1,0-10000 Hz, dan ±10 in/sec peak.

CTC VE135 Piezo Velocity Sensor, Top Exit 2 Pin Connector, 500 mV/in/sec, ±10% | Sensor Kecepatan Getaran

VE135 memberi sensitivitas 500 mV/in/sec ±10% untuk pembacaan velocity pada amplitudo rendah, dengan dynamic range ±10 in/sec. Respons frekuensi 1,0-10000 Hz (±3dB) tersedia pada top exit 2 Pin Connector.

Fitur Utama

  • Dynamic range peak ±10 in/sec
  • Integrasi ke Velocity dilakukan di dalam sensor
  • Koneksi 2 Pin MIL standar atau Integral Cable

Spesifikasi

Part NumberVE135 / M/ or M8/VE135
Sensitivity (±10%)500 mV/in/sec
Frequency Response (±3dB)60-600,000 CPM / 1,0-10000 Hz
Frequency Response (±10%)120-300,000 CPM / 2,0-5000 Hz
Dynamic Range± 10 in/sec. pk *Vsource ≥ 22V, 12Vbias
Transverse Sensitivity≤5%
Voltage Source18-30 VDC
Constant Current Excitation2-10 mA
Spectral Noise @ 10 Hz200 µ IPS/√Hz
Spectral Noise @ 100 Hz6 µ IPS/√Hz
Spectral Noise @ 1000 Hz0.7 µ IPS/√Hz
Bias Output Voltage10-14 VDC
Case Isolation>10 8 ohm
Operating Temperature Range-58 to 250 °F / -50 to 121 °C
Maximum Shock Protection5,000 g, peak
Electromagnetic SensitivityCE
SealingWelded, Hermetic
Submersible Depth200 ft. / 60 m
Sensing ElementPZT Ceramic
Sensing StructureShear Mode
Weight3.2 oz / 90 grams
Case Material316L Stainless Steel
Mounting Thread1/4-28 Blind Tapped Hole
Connector (Non-Integral)2 Pin MIL-C-5015
Resonant Frequency1,320,000 CPM / 22000 Hz
Mounting Torque2 to 5 ft. lbs / 2,7 to 6,8 Nm
Mounting Hardware Supplied1/4-28 Stud / M6x1 or M8x1.25 Adapter Stud
Calibration CertificateCA10

Aplikasi

Pengujian Suara & Getaran (Sound & Vibration)

Pengujian suara & getaran (sound and vibration) mengukur respons mekanik dan akustik produk terhadap guncangan, getaran frekuensi rendah, dan kebisingan — kunci untuk NVH otomotif, reliabilitas elektronik, dan integritas struktur dirgantara.

Lihat solusi aplikasi →

IIoT & Monitoring Industri — Industrial IoT & Condition Monitoring

Sistem Industrial Internet of Things (IIoT) dan condition monitoring untuk mengumpulkan, merekam, dan menganalisis data mesin, energi, suhu, getaran, arus, serta proses secara berkelanjutan.

Lihat solusi aplikasi →

Penggunaan Produk

Gunakan VE135 untuk pengukuran velocity presisi pada mesin dengan level getaran rendah.

Unduhan & Sumber

Butuh konsultasi teknis?

Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.

Produk Terkait

Referensi

https://www.ctconline.com/products/ctc-line/industrial-accelerometers/piezo-velocity-sensors/?prd=VE135

Scroll to Top
WhatsApp