Katalog › Fiber Optic Sensor › imc CANSASfdx-FBG-T8 Modul Temperatur Serat Optik 8 Kanal

IMC

imc CANSASfdx-FBG-T8 Modul Temperatur Serat Optik 8 Kanal

Fiber-optic measurement technology from imc

imc CANSASfdx-FBG-T8 Modul Temperatur Serat Optik 8 Kanal

Fiber-optic sensors enable measurements in environments where electrical sensors reach their limits. Unlike electrical measurement methods, the purely optical measurement method is completely insensitive to environmental influences.

Download

Download

  • Download: Tech Article “Fiber-optic temperature measurement solves HV challenges in e-mobility”

What are FBG sensors?

What are FBG sensors?

FBG sensors consist of a glass fiber into which one or more fiber Bragg gratings are inserted. These fiber Bragg gratings are formed when the refractive index of the glass fiber is cyclically changed during manufacture under the influence of a laser. When the glass fiber is illuminated, a characteristic wavelength is now reflected and this wavelength changes under strain.

Advantage of the fos4x series fiber optic sensors:

  • No influence from electrical voltages or magnetic fields
  • Can be used in explosive and high-explosive environments
  • Low installation costs and short set-up times
  • Strain measurements with 10 times higher bending radii and 1,000 times more load changes compared to traditional strain gauge sensors
  • Long supply lines at up to several hundred meters without loss of quality
  • Long service life
  • Corrosion and moisture resistant

Products

Products

© document.write(new Date().getFullYear()); imc Test & Measurement GmbH. All rights reserved.

Spesifikasi

Channels8 fiber-optic temperature inputs (FBG)
FilterDigital low-pass, averaging filter (sinc), anti-aliasing filter
Resolution24 bit ADC; CAN output as 32 bit float or 16 bit integer
Wavelength measuring range1549 ... 1553 nm (calibrated range)
Laser sourceLaser class 1, < 10 mW (typ. 1 mW)
Compatible fiber typesSMF 28 (single-mode)
CAN busConfigurable baud rate, max. 1 Mbit/s, galvanically isolated
Power supplyDC 10 V to 50 V, galvanically isolated; LEMO.0B (2-pin) or via DSUB-9 CAN connector
Shock resistance50 g (pk over 5 ms)
Ingress protectionIP40 with optional protective cover, otherwise IP20
Operating temperature range-5 C to +75 C (without condensation)
Calibrated operating range-5 C to +60 C (with specified temperature drift)
Storage temperature-40 C to +85 C

Unduhan & Sumber

Datasheet7 model

Butuh konsultasi teknis?

Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.

Produk Terkait

Referensi

https://www.imc-tm.com/products/sensor-solutions/fiber-optic-measurement-technology

Scroll to Top
WhatsApp