Katalog › Data Acquisition & Logger › imc CRONOS-XT Sistem Akuisisi Data Modular Rugged

IMC

imc CRONOS-XT Sistem Akuisisi Data Modular Rugged

Rugged data acquisition (DAQ) system for harsh environments

Available models include LV3-8, ISO2-8, ISOF-8, ICPU2-8, AUDIO2-4, BR2-4, B-8, DCB2-8, UNI2-8, UNI-4.

imc CRONOS-XT Sistem Akuisisi Data Modular Rugged

No more compromises: With the imc CRONOS-XT, imc is offering for the first time an ultra-robust device in a completely modular platform. The rugged data acquisition base unit and a number of amplifiers can be conveniently connected to form a complete system: without tools and cables via a simple click-mechanism. With protection class IP67 and MIL-STD810F, the system is protected against dirt, dust and water as well as severe shocks and vibrations. The rugged data logger is therefore ideal for mobile measurements on construction machinery, tractors, agricultural machinery and vehicle testing that takes place in harsh environments.

Perfect for mobile use in harsh environments

Perfect for mobile use in harsh environments

MIL-STD-810F

Particularly resistant to shock and vibration

More flexibility for everyday testing

Is an 8-channel vibration measurement planned for today? Then simply click the ICP module on your base unit and off you go. And tomorrow? Thanks to the modular building block technology, the DAQ system can be ideally adapted to the measurement task at hand. A broad selection of high-precision universal and special measurement amplifiers allow the direct connection of almost all sensor types, such as thermocouples, RTD (PT100/1000), voltage and current signals, acceleration and sound sensors (IEPE), displacement transducers (LVDT), all the way to strain gauges as full/half/quarter bridges and corresponding bridge sensors such as load cells. The precise and low-noise measurement amplifiers digitize with 24 bits and have high bandwidth and range dynamics.

Extremely robust DAQ system

  • Water- and dustproof according to IP67
  • High shock and vibration resistance according to MIL-STD-810F
  • Robust, impact-resistant housing
  • Sealed electronics (condensation-proof)
  • Wide temperature range from -40 °C to +85 °C

System design

System design

Spatially distributable

In addition to the modular design as a centralized system, imc CRONOS-XT can also be installed in a spatially distributed topology. This allows measurement amplifiers to be placed close to the sensor in order to keep the length of sensitive and expensive cables to a minimum. Networking is accomplished via the EtherCAT-based imc system bus. All data converge synchronously in the base unit.

Networkable with multiple devices

For extensive measurements with hundreds or thousands of channels, multiple imc CRONOS-XT, as well as all other imc measurement devices, can be operated together as a single system. The devices are networked via Ethernet and synchronized via DCF77, IRIG-B, GPS or PTP. The data are stored autonomously in the devices and/or transferred to a NAS or PC via network streaming.

Real-time analyses in the device

Real-time analyses in the device

Be sure to get finished results while the measurement is still running. With the integrated imc Online FAMOS computing platform, you can calculate and analyze your raw data in real time. Using a convenient assistant, you can create your own personal real-time analyzer: simply drag & drop from a comprehensive collection of mathematical and static functions as well as finished analyses such as FTT, class counting and order tracking. This makes it possible to create your own evaluation algorithms and set up smart data analyses without programming.

Compressed and intuitive results are not only available directly from the stand-alone device (without PC), they can also be displayed live on an imc handheld display. During the test, e.g., during a test drive, you get immediate feedback on the running test, which can then be reacted to immediately, e.g., by appropriate driving actions.

In practice

In practice

Testing under harsh conditions

The stress that is imposed on machines for construction and agriculture can be enormous. This makes it all the more important to carry out comprehensive functional and stress tests when developing such machinery. imc CRONOS-XT provides test and measurement engineers with the perfect tool for such tasks. Universal measurement amplifiers precisely measure all sensors installed on the machine including strain gauges, IEPE/ICP, displacement, force and pressure and perform real-time analyses, e.g., for rosette calculations or spectral analysis (FFT). The robust housing reliably protects the equipment from dust, dirt, water and mud.

Keeping track of noise and vibration

To protect both people and the environment from noise, vehicles and machinery must comply with many regulations. These not only include noise emissions, but also vibrations affecting people and components. With imc CRONOS-XT in conjunction with imc WAVE software, users have a complete package for noise and vibration analyses at their disposal: From noise measurements during road tests through structural analyses on the test bench to vibration tests in the field.

Fatigue testing and load profiles

The imc CRONOS-XT provides test engineers with the ideal system for acquiring real live road load data and operate fleet monitoring. Thanks to the high shock and vibration resistance according to MIL-STD-810F, imc CRONOS-XT is able to reliably record test data even under extreme conditions. Functions such as self-start, online class-counting, GPS tracking and cloud connection for measurement data transfer and online monitoring are particularly helpful for week-long test drives.

Comfortable measurement software

No matter whether you want to configure your imc CRONOS-XT for a fast mobile measurement in “black box” mode, set up live monitoring for hundreds of channels for prototype testing or create a complete test bench automation with your own control panel – with imc STUDIO you have full control over your complete measurement process: from channel configuration to report. imc STUDIO combines data acquisition, visualization, analysis and automation.

Technical data

Technical data

Digital modules and outputs

Digital I/O: The digital inputs and outputs are galvanically isolated and configurable for 24V / 5V (TTL/COMOS) with a maximum output current of 0.7 A. Counter: The counter inputs have full analog input conditioning with 500 kHz analog bandwidth (differential input), analog filter and software adjustable switching thresholds. The supported measurement modes are event counter, time, frequency, speed, rpm, angle and distance.

Model & Varian

Perbandingan Model & Varian
ModelChannels per moduleConnectorSampling rate per channel — Max sampling rateSampling rate per channel — Max bandwidthisolated — min. voltage range (mV)
LV3-88DSUB-15100 kHz48 kHz5
ISO2-88DSUB-15 / LEMO.1B100 kHz11 kHz50
ISOF-88DSUB-15 / LEMO.1B100 kHz48 kHz50
ICPU2-88BNC100 kHz48 kHz5
AUDIO2-44BNC100 kHz48 kHz5
BR2-44DSUB-15100 kHz14 kHz5
B-88DSUB-15100 kHz48 kHz5
DCB2-88DSUB-15100 kHz5 kHz5
UNI2-88DSUB-15100 kHz48 kHz5
UNI-44DSUB-15100 kHz48 kHz2,5

Geser tabel ke samping untuk melihat semua spesifikasi →

Spesifikasi

General — System sampling rate2000 kSps
Operating conditions — Temperature range-40°C to +85°C
Operating conditions — Condensation-proof⬤
Operating conditions — Shock and vibrationMIL-STD-810F
Connectivity — Ethernet1 GBit
Connectivity — internal Wi-Fi adapter IEEE 802.11.n (300 Mbit/s)◯
Connectivity — EtherCAT connection for distributed CRXT blocks and CRFX modules◯
Connectivity — GPS connector⬤
Connectivity — imc handheld display⬤
Connectivity — Sync connector (for the synchronization of multiple devices)⬤
Connectivity — Remote connector (remote-control main switch)⬤
Data storage — Memory card slot (CFast)⬤
Data storage — Storage on PC /network drive (NAS)⬤
Data storage — SSD hard drive (internal)◯
Autonomous device capabilities — Complex trigger functionality (PC-independent)⬤
Autonomous device capabilities — Onboard real-time data analysis (imc Online FAMOS)⬤
Autonomous device capabilities — Autarkic operation without PC, self-start (Timer, absolute Zeit)⬤
Synchronization & clock — Master-Slave between imc systems⬤
Synchronization & clock — NTP and PTP network-based synchronization⬤
Synchronization & clock — Via external GPS signal⬤
Synchronization & clock — Via external IRIG-B & DCF-77 signal⬤
Fieldbus options — CAN, CAN FD◯
Fieldbus options — LIN◯
Fieldbus options — FlexRay◯
Fieldbus options — MVB◯
Fieldbus options — ARINC◯
Fieldbus options — XCPoE (Master or Slave)◯
Fieldbus options — EtherCAT Slave◯
Fieldbus options — PROFINET◯
Fieldbus options — Interface for imc telemetry◯
Power supply — DC input 10 to 35 V (isolated)⬤
Power supply — AC/DC adapter (110 to 230 VAC)⬤
Power supply — Supply of distributed xt-blocks (CRXT) via Power-over-EtherCAT◯
Power supply — Data integrity in case of power failure⬤
LV3-8
Channels per module8
ConnectorDSUB-15
Sampling rate per channel — Max sampling rate100 kHz
Sampling rate per channel — Max bandwidth48 kHz
isolated — min. voltage range (mV)5
Audio & vibration — IEPE sensors (ICP)DUSB ICP-plug
ISO2-8
Channels per module8
ConnectorDSUB-15 / LEMO.1B
Sampling rate per channel — Max sampling rate100 kHz
Sampling rate per channel — Max bandwidth11 kHz
isolated — min. voltage range (mV)50
Current measurement — 20 mA via internal shunt(LEMO)
Current measurement — 20 mA via shunt plug(DSUB)
Temperature measurement — Thermocouple(DSUB)
Audio & vibration — IEPE sensors (ICP)DUSB ICP-plug
ISOF-8
Channels per module8
ConnectorDSUB-15 / LEMO.1B
Sampling rate per channel — Max sampling rate100 kHz
Sampling rate per channel — Max bandwidth48 kHz
isolated — min. voltage range (mV)50
Current measurement — 20 mA via internal shunt(LEMO)
Current measurement — 20 mA via shunt plug(DSUB)
Temperature measurement — Thermocouple(DSUB)
Audio & vibration — IEPE sensors (ICP)DUSB ICP-plug
ICPU2-8
Channels per module8
ConnectorBNC
Sampling rate per channel — Max sampling rate100 kHz
Sampling rate per channel — Max bandwidth48 kHz
isolated — min. voltage range (mV)5
AUDIO2-4
Channels per module4
ConnectorBNC
Sampling rate per channel — Max sampling rate100 kHz
Sampling rate per channel — Max bandwidth48 kHz
isolated — min. voltage range (mV)5
Miscellaneous — Sensor supply(MIC-version)
Miscellaneous — Sensor supply (per channel)(MIC-version)
BR2-4
Channels per module4
ConnectorDSUB-15
Sampling rate per channel — Max sampling rate100 kHz
Sampling rate per channel — Max bandwidth14 kHz
isolated — min. voltage range (mV)5
Audio & vibration — IEPE sensors (ICP)DUSB ICP-plug
B-8
Channels per module8
ConnectorDSUB-15
Sampling rate per channel — Max sampling rate100 kHz
Sampling rate per channel — Max bandwidth48 kHz
isolated — min. voltage range (mV)5
Audio & vibration — IEPE sensors (ICP)DUSB ICP-plug
DCB2-8
Channels per module8
ConnectorDSUB-15
Sampling rate per channel — Max sampling rate100 kHz
Sampling rate per channel — Max bandwidth5 kHz
isolated — min. voltage range (mV)5
Audio & vibration — IEPE sensors (ICP)DUSB ICP-plug
UNI2-8
Channels per module8
ConnectorDSUB-15
Sampling rate per channel — Max sampling rate100 kHz
Sampling rate per channel — Max bandwidth48 kHz
isolated — min. voltage range (mV)5
Audio & vibration — IEPE sensors (ICP)DUSB ICP-plug
UNI-4
Channels per module4
ConnectorDSUB-15
Sampling rate per channel — Max sampling rate100 kHz
Sampling rate per channel — Max bandwidth48 kHz
isolated — min. voltage range (mV)2,5
Audio & vibration — IEPE sensors (ICP)DUSB ICP-plug

Unduhan & Sumber

Datasheet19 model

Butuh konsultasi teknis?

Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.

Produk Terkait

Referensi

https://www.imc-tm.com/products/daq-systems/imc-cronos-xt

Scroll to Top
WhatsApp