IMC
imc WFT Wheel Force Transducer 6 Komponen
From compact cars to SUVs and light trucks
Available models include WFT-Cx, WFT-Cx Titanium, WFT-Cx Steel PH17-4, WFT-Cxs.

- Acquires forces and torques in the X-, Y-, Z-directions on the rotating wheel
- Data output referred to vehicle coordinate system with online display
- Maximum immunity to interference and measurement accuracy through on-site digitization and online processing of raw data
- UPS to prevent issues during engine cranking
- Precise temperature compensation
- Robust WFT sensor housing with long service life
- Safety feature: breakage protection through interlocking mechanical structure
- Versatile range of applications during winter tests, brake tests and much more
Acquire load collective data from prototypes
Acquire load collective data from prototypes
In the development of new vehicles, there are often no suitable load collective data for determining the real stress on the components during operation. These must be determined by means of test drives. The WFT from imc can be used for wheel sizes from 13″ and is proven by its robust, waterproof design, even during multi-day testing. The measured values are precisely temperature-compensated by means of thermosensors distributed throughout the wheel.
Fatigue testing on the test stand
Fatigue testing on the test stand
A WFT for component lifetime testing on the test stand must be durable. Especially for these applications, imc offers WFT sensor housings made of titanium or steel. If a rotating measurement is carried out on a chassis dyno or on a road test, the wired signal transmission to the control unit is simply replaced by a stator with telemetric transmission. Since all of the WFT sensor housing types have the same shadow mask, existing adapters can be used for all types.
Function trials during winter
Function trials during winter
Negative temperatures, melting water, ice and snow are a challenge for every measurement system. The WFTs imc have a wide temperature range: WFT-Cx -40° C … +105° C. In addition, their waterproof design allows test drives to be conducted in any weather condition – even on ice, snow or meltwater. Furthermore, thanks to its robust design and impact resistance of up to 100 g, testing over rough terrain is no longer an obstacle.
Model & Varian
| Model | Material | Measurement principle | Measurement ranges: Forces | Measurement ranges: Torques | Protection class |
|---|---|---|---|---|---|
| WFT-Cx | Aluminum | Temperature compensated strain gauge application | Fx, Fz = ±45 kN | Mx, Mz = ±8.75 kNmMy = ±8.75 kNm | IP66, IP67 |
| WFT-Cx Titanium | Titanium | Temperature compensated strain gauge application | Fx, Fz = ±60 kN | Mx, Mz = ±10 kNmMy = ±10 kNm | IP66, IP67 |
| WFT-Cx Steel PH17-4 | Steel PH17-4 | Temperature compensated strain gauge application | Fx, Fz = ±60 kN | Mx, Mz = ±10 kNmMy = ±10 kNm | IP66, IP67 |
| WFT-Cxs | Aluminium | Temperature compensated strain gauge application | Fx, Fz = ±25 kN | Mx, Mz = ±6 kNmMy = ±6 kNm | IP66, IP67 |
Geser tabel ke samping untuk melihat semua spesifikasi →
Spesifikasi
| WFT-Cx | |
|---|---|
| Material | Aluminum |
| Measurement principle | Temperature compensated strain gauge application |
| Measurement ranges | Forces: Fx, Fz = ±45 kN |
| Measurement ranges | Torques: Mx, Mz = ±8.75 kNmMy = ±8.75 kNm |
| Protection class | IP66, IP67 |
| Sampling rate per channel | up to 5 kHz |
| Angular resolution with 5000 increments | 0.072° |
| Measurement uncertainty | Fx, Fz, Fy < 0.5%; Mx, Mz, < 0.6%; My < 0.5% |
| Non-linearity | Fx, Fz < 0.1%; Fy < 0.15%; Mx, My, Mz < 0.1% |
| Low pass filter | 6-pol Butterworth filter |
| Weight w/o adapter (appx.) | 7.5 kg |
| Rim diameter | min. 14" (356 mm) |
| Hub diameter with adapter | max. 5.5" |
| Operating temperature | -40° C to +105° C |
| Mechanical load | Stress analysis according to BMW QV 36026 |
| Acceleration | max. 100 g |
| RPM | max. 3060 rpm (approx. 350 km/h) |
| Safety | Mechanical breakage protection |
| Dimension | outer diameter (w/o adapter): 317.5 mm |
| Dimension | inner diameter (w/o adapter): 203 mm |
| Dimension | height: 76 mm |
| Temperature drift | 0.005% / °C |
| Mounting bolts | 32 |
| Adaption | Customer-specific adaption for any vehicle possible |
| WFT-Cx Titanium | |
| Material | Titanium |
| Measurement principle | Temperature compensated strain gauge application |
| Measurement ranges | Forces: Fx, Fz = ±60 kN |
| Measurement ranges | Torques: Mx, Mz = ±10 kNmMy = ±10 kNm |
| Protection class | IP66, IP67 |
| Sampling rate per channel | up to 5 kHz |
| Angular resolution with 5000 increments | 0.072° |
| Measurement uncertainty | Fx, Fz, Fy < 0.5%; Mx, Mz, < 0.6%; My < 0.5% |
| Non-linearity | Fx, Fz < 0.1%; Fy < 0.15%; Mx, My, Mz < 0.1% |
| Low pass filter | 6-pol Butterworth filter |
| Weight w/o adapter (appx.) | 10.5 kg |
| Rim diameter | min. 14" (356 mm) |
| Hub diameter with adapter | max. 5.5" |
| Operating temperature | -40° C to +105° C |
| Mechanical load | Stress analysis according to BMW QV 36026 |
| Acceleration | max. 100 g |
| RPM | max. 3060 rpm (approx. 350 km/h) |
| Safety | Mechanical breakage protection |
| Dimension | outer diameter (w/o adapter): 317.5 mm |
| Dimension | inner diameter (w/o adapter): 203 mm |
| Dimension | height: 76 mm |
| Temperature drift | 0.005% / °C |
| Mounting bolts | 32 |
| Adaption | Customer-specific adaption for any vehicle possible |
| WFT-Cx Steel PH17-4 | |
| Material | Steel PH17-4 |
| Measurement principle | Temperature compensated strain gauge application |
| Measurement ranges | Forces: Fx, Fz = ±60 kN |
| Measurement ranges | Torques: Mx, Mz = ±10 kNmMy = ±10 kNm |
| Protection class | IP66, IP67 |
| Sampling rate per channel | up to 5 kHz |
| Angular resolution with 5000 increments | 0.072° |
| Measurement uncertainty | Fx, Fz, Fy < 0.5%; Mx, Mz, < 0.6%; My < 0.5% |
| Non-linearity | Fx, Fz < 0.1%; Fy < 0.15%; Mx, My, Mz < 0.1% |
| Low pass filter | 6-pol Butterworth filter |
| Weight w/o adapter (appx.) | 17.5 kg |
| Rim diameter | min. 14" (356 mm) |
| Hub diameter with adapter | max. 5.5" |
| Operating temperature | -40° C to +105° C |
| Mechanical load | Stress analysis according to BMW QV 36026 |
| Acceleration | max. 100 g |
| RPM | max. 3060 rpm (approx. 350 km/h) |
| Safety | Mechanical breakage protection |
| Dimension | outer diameter (w/o adapter): 317.5 mm |
| Dimension | inner diameter (w/o adapter): 203 mm |
| Dimension | height: 76 mm |
| Temperature drift | 0.005% / °C |
| Mounting bolts | 32 |
| Adaption | Customer-specific adaption for any vehicle possible |
| WFT-Cxs | |
| Material | Aluminium |
| Measurement principle | Temperature compensated strain gauge application |
| Measurement ranges | Forces: Fx, Fz = ±25 kN |
| Measurement ranges | Torques: Mx, Mz = ±6 kNmMy = ±6 kNm |
| Protection class | IP66, IP67 |
| Sampling rate per channel | up to 5 kHz |
| Angular resolution with 5000 increments | 0.072° |
| Measurement uncertainty | Fx, Fz, Fy < 0.5%; Mx, Mz, < 0.6%; My < 0.5% |
| Non-linearity | Fx, Fz < 0.1%; Fy < 0.15%; Mx, My, Mz < 0.1% |
| Low pass filter | 6-pol Butterworth filter |
| Weight w/o adapter (appx.) | 5.9 kg |
| Rim diameter | min. 14" (356 mm) |
| Hub diameter with adapter | max. 5.5" |
| Operating temperature | -40° C to +105° C |
| Mechanical load | Stress analysis according to BMW QV 36026 |
| Acceleration | max. 100 g |
| RPM | max. 3060 rpm (approx. 350 km/h) |
| Safety | Mechanical breakage protection |
| Dimension | outer diameter (w/o adapter): 317.5 mm |
| Dimension | inner diameter (w/o adapter): 203 mm |
| Dimension | height: 61.5 mm |
| Temperature drift | 0.005% / °C |
| Mounting bolts | 32 |
| Adaption | Customer-specific adaption for any vehicle possible |
Unduhan & Sumber
Datasheet3 model
Pilih model untuk membuka datasheet resmi produsen.
Butuh konsultasi teknis?
Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.
Produk Terkait
Referensi
https://www.imc-tm.com/products/sensor-solutions/wheel-force-transducer




