Katalog › Accelerometer › CTC AC254-M12A Low Cost, Low Frequency Accelerometer, Top Exit 4 Pin M12 Connector, 1,000 mV/g, ±15% | Akselerometer

CTC

CTC AC254-M12A Low Cost, Low Frequency Accelerometer, Top Exit 4 Pin M12 Connector, 1,000 mV/g, ±15% | Akselerometer

Akselerometer frekuensi rendah 1000 mV/g dengan konektor 4 pin M12 dan respons 0,1-10000 Hz untuk mesin putaran rendah.

CTC AC254-M12A Low Cost, Low Frequency Accelerometer, Top Exit 4 Pin M12 Connector, 1,000 mV/g, ±15% | Akselerometer

Akselerometer frekuensi rendah hemat biaya CTC AC254-M12A memakai konektor 4 pin M12 top exit dengan sensitivitas 1000 mV/g ±15%. Respons frekuensi 0,1-10000 Hz (±3dB) dan dynamic range ±7 g peak untuk rotor putaran rendah, main bearing, dan input gear box. Spectral noise 1,3 µg/√Hz pada 10 Hz dengan settling time di bawah 2 detik.

Fitur Utama

  • Sensitivitas 1000 mV/g
  • Respons frekuensi 0,1 Hz hingga 10 kHz (±3dB)

Spesifikasi

Part NumberAC254-M12A / M/ or M8/AC254-M12A
Sensitivity (±15%)1000 mV/g
Frequency Response (±3dB)6-600,000 CPM / 0,1-10000 Hz
Dynamic Range± 7 g, peak *Vsource ≥ 22V, 12Vbias
Transverse Sensitivity≤5%
Settling Time< 2 seconds
Voltage Source18-30 VDC
Constant Current Excitation2-10 mA
Spectral Noise @ 10 Hz1.3 µg/√Hz
Spectral Noise @ 100 Hz0.2 µg/√Hz
Spectral Noise @ 1000 Hz0.1 µg/√Hz
Output Impedance< 100 ohm
Bias Output Voltage10-14 VDC
Case Isolation> 10 8 ohm
Operating Temperature Range-58 to 250 °F / -50 to 121 °C
Maximum Shock Protection5000 g, peak
Electromagnetic SensitivityCE
SealingWelded, Hermetic
SIL RatingSIL 2
Sensing ElementPZT Ceramic
Sensing StructureShear Mode
Weight3.25 oz / 92 g
Case Material316L Stainless Steel
Mounting Thread1/4-28 Blind Tapped Hole
Connector (Non-Integral)4 Pin M12
Resonant Frequency1,020,000 CPM / 17000 Hz
Mounting Torque2 to 5 ft. lbs. / 2.7 to 6.8 Nm
Mounting Hardware Supplied1/4-28 Stud / M6x1 or M8x1.25 Adapter Stud
Calibration CertificateCA10

Aplikasi

Pengujian Suara & Getaran (Sound & Vibration)

Pengujian suara & getaran (sound and vibration) mengukur respons mekanik dan akustik produk terhadap guncangan, getaran frekuensi rendah, dan kebisingan — kunci untuk NVH otomotif, reliabilitas elektronik, dan integritas struktur dirgantara.

Lihat solusi aplikasi →

IIoT & Monitoring Industri — Industrial IoT & Condition Monitoring

Sistem Industrial Internet of Things (IIoT) dan condition monitoring untuk mengumpulkan, merekam, dan menganalisis data mesin, energi, suhu, getaran, arus, serta proses secara berkelanjutan.

Lihat solusi aplikasi →

Penggunaan Produk

Gunakan pada rotor putaran rendah dengan jalur pengukuran berkonektor M12 dan amplitudo getaran kecil.

Unduhan & Sumber

Butuh konsultasi teknis?

Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.

Produk Terkait

Referensi

https://www.ctconline.com/products/ctc-line/industrial-accelerometers/low-frequency-1000-mv-g-accelerometers/?prd=AC254-M12A

Scroll to Top
WhatsApp