JTAG-HS3 Programming Cable

The JTAG-HS3 is an affordable high-speed AMD® FPGA programming solution. The HS3 builds on the successful JTAG-HS1 by adding an open-drain buffer to pin 14 allowing for the debugging of AMD Zynq-SOC processors. It can be attached to target boards using AMD's 2×7 connector*, and is compatible with all AMD tools, including iMPACT™, ChipScope™, and EDK. 
When connected to a PC via a standard A to micro-USB cable, the JTAG HS3 receives its power from USB and can be recognized as a Digilent programming cable, even if the HS3 is not attached to the target board. The JTAG bus can be shared with other devices as the HS3's signals are held in high-impedance, except when actively driven during programming. The HS3 is small and light, allowing it to be held firmly in place by the system board connector. 
* This is a unique programming header and is not compatible with the 1×6 MTE Digilent JTAG Connector.
Note: This cable is not needed for Digilent FPGA boards as our boards are designed with integrated programming circuitry.
To view our EMC Disclaimer, click here.

Small, complete, all-in-one JTAG programming/debugging solution for AMD FPGAs and SoCs
Plugs directly into standard AMD JTAG 2.0 mm pitch header
Separate Vref drives JTAG signal voltages; Vref can be any voltage between 1.8V and 5V
High-Speed USB2 port that can drive JTAG bus up to 30Mbit/sec (frequency adjustable by user)
Compatible with AMD ISE® 14.1 and newer, AMD Vivado® 2013.3 and newer
Uses USB Micro-B connector
Open drain buffer on pin 14 allows debugging software to reset the processor core of AMD's Zynq platform

Product Compliance: 

HTC: 8473301180
ECCN: EAR99

One JTAG-HS3 Programming Cable.

Compatible with AMD ISE 14.1 and newer, AMD Vivado 2013.3 and newer, iMPACT, ChipScope, and EDK.

Quickly find what you need to get started.
All product support including documentation, projects, and the Digilent Forum can be accessed through the product resource center.
Resource Center
Quick Links
Reference Manual

Aplikasi & Use Case: JTAG-HS3 Programming Cable mendukung kebutuhan integrasi sistem pengujian, aksesori pengukuran laboratorium, dan pemrosesan sinyal pada fasilitas riset dan industri.