Nexys Video AMD Artix™ 7 FPGA: Trainer Board for Multimedia Applications

The Nexys Video is a powerful platform for audio/video applications. Built around the AMD Artix™ 7 XC7A200T, the most powerful chip from the AMD Artix™ 7 FPGA family, the Nexys Video has all the performance and FPGA real estate needed for high-bandwidth and low-latency A/V processing.
Utilizing A/V signals is made easy with an on-board Mini DisplayPort, three high-speed digital video ports, and a 24-bit audio codec. One can conveniently scale their design with Ethernet, UART, and USB interfaces and integrate it into larger systems. There is no limit to customizability with the 160-pin FMC LPC connector and four additional Pmod ports.
The Nexys Video is supported by AMD Vivado™ Design Suite, including the free WebPACK edition, making the Nexys Video a great option for any budget.
Guides and demos are available to help users get started quickly with the Nexys Video. These can be found through the Support Materials tab.
To view our EMC Disclaimer, click here.

FPGA Features

AMD Artix™ 7 XC7A200T-1SBG484C
33,650 logic slices, each with four 6-input LUTs and 8 flip-flops
13 Mbits of fast block RAM (3x more than the Nexys 4 DDR)
10 clock management tiles, each with phase-locked loop (PLL)
740 DSP slices
Internal clock speeds exceeding 450MHz
On-chip analog-to-digital converter (XADC)
Up to 3.75Gbps GTP transceivers

Board Features

Programmable over JTAG, Quad-SPI Flash, microSD, and USB flash drive
512MB 400MHz (800MT/s) DDR3
32MB Quad-SPI flash
microSD card slot for nonvolatile storage (card not included)
Dedicated onboard USB port for JTAG programming and data transfers
Powered from any 12V source (36W wall supply included)
HDMI sink and HDMI source
Mini DisplayPort source
24-bit Audio codec w/ four 3.5mm jacks
10/100/1000 Ethernet PHY with included unique MAC address
User EEPROM
USB-UART bridge
Digilent parallel transfer interface (DTPI) for high-speed data transfers over USB
Digilent serial peripheral interface (DSPI) for medium-speed data transfers over USB
Onboard user interfaces: 128×32 monochrome OLED display, 5 user push buttons, 8 user switches, 8 user LEDs
USB HID host for mice and keyboards
Fully-populated 160-pin FMC LPC connector
Four Pmod ports, Pmod for XADC signals

Product Compliance: 

HTC: 8471500150
ECCN: 5A992.c

Nexys Video Artix 7 FPGA
Custom Digilent cardboard packing
USB A to micro-B programming cable and one 12V, 3A wall power supply with US and EU adapters – UK plug adapter not included.

To create and modify designs for your Nexys Video, you can use the AMD Vivado™ Design Suite. Vivado is a software designed for the synthesis and analysis of HDL designs. The Nexys Video is supported by the free Standard edition of the AMD Vivado™ Design Suite.
Note: AMD software tools are not available for download in some countries. Prior to purchasing the Nexys Video, please check the supporting software's availability, as it is required for the board's use.

Quickly find what you need to get started and reduce mean time to blink.
All product support including documentation, projects, and the Digilent Forum can be accessed through the product resource center.
Resource Center
Quick Links
Reference ManualSchematic

Aplikasi & Use Case: Nexys Video AMD Artix™ 7 FPGA: Trainer Board for Multimedia Applications dirancang untuk pengembangan prototipe logika digital berbasis FPGA/SoC, pemrosesan sinyal digital (DSP), pengujian arsitektur prosesor sistem tertanam, serta laboratorium pendidikan teknik komputer dan robotika.