IMC
imc CANSASfdx-FBG-T8 Modul Temperatur Serat Optik 8 Kanal
Fiber-optic measurement technology from imc

Fiber-optic sensors enable measurements in environments where electrical sensors reach their limits. Unlike electrical measurement methods, the purely optical measurement method is completely insensitive to environmental influences.
Download
Download
- Download: Tech Article “Fiber-optic temperature measurement solves HV challenges in e-mobility”
What are FBG sensors?
What are FBG sensors?
FBG sensors consist of a glass fiber into which one or more fiber Bragg gratings are inserted. These fiber Bragg gratings are formed when the refractive index of the glass fiber is cyclically changed during manufacture under the influence of a laser. When the glass fiber is illuminated, a characteristic wavelength is now reflected and this wavelength changes under strain.
Advantage of the fos4x series fiber optic sensors:
- No influence from electrical voltages or magnetic fields
- Can be used in explosive and high-explosive environments
- Low installation costs and short set-up times
- Strain measurements with 10 times higher bending radii and 1,000 times more load changes compared to traditional strain gauge sensors
- Long supply lines at up to several hundred meters without loss of quality
- Long service life
- Corrosion and moisture resistant
Products
Products
© document.write(new Date().getFullYear()); imc Test & Measurement GmbH. All rights reserved.
Spesifikasi
| Channels | 8 fiber-optic temperature inputs (FBG) |
|---|---|
| Filter | Digital low-pass, averaging filter (sinc), anti-aliasing filter |
| Resolution | 24 bit ADC; CAN output as 32 bit float or 16 bit integer |
| Wavelength measuring range | 1549 ... 1553 nm (calibrated range) |
| Laser source | Laser class 1, < 10 mW (typ. 1 mW) |
| Compatible fiber types | SMF 28 (single-mode) |
| CAN bus | Configurable baud rate, max. 1 Mbit/s, galvanically isolated |
| Power supply | DC 10 V to 50 V, galvanically isolated; LEMO.0B (2-pin) or via DSUB-9 CAN connector |
| Shock resistance | 50 g (pk over 5 ms) |
| Ingress protection | IP40 with optional protective cover, otherwise IP20 |
| Operating temperature range | -5 C to +75 C (without condensation) |
| Calibrated operating range | -5 C to +60 C (with specified temperature drift) |
| Storage temperature | -40 C to +85 C |
Unduhan & Sumber
Datasheet7 model
Pilih model untuk membuka datasheet resmi produsen.
Butuh konsultasi teknis?
Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.
Produk Terkait
Referensi
https://www.imc-tm.com/products/sensor-solutions/fiber-optic-measurement-technology




