Katalog › Telemetry › imc T1 Telemetri Satu Kanal 16-bit

IMC

imc T1 Telemetri Satu Kanal 16-bit

T1 Digital 1-channel telemetry

imc T1 Telemetri Satu Kanal 16-bit

The 1-channel telemetry system T1 is ideal for wireless transmission of strain gauge signals from rotating shafts. The transmitter electronics allow the direct connection of strain gauges in full- and half-bridge mode. The bridge supply is fixed 4 Volt DC and the gain can be freely selected in 4 levels. The transmitter electronics (encoder) is only 35 mm wide, 18 mm long and 12 mm deep and weighs only 13 grams.

Simple installation

In a matter of minutes, the transmitter can either be attached to the shaft using a special glass-fiber-reinforced tape, or it can be installed directly in a ring housing made for the shaft.

Examples of Housings

Examples of Housings

Wireless transmission and power supply

The power supply to the transmitter side and the digital data transmission to the receiver operate inductively. The T1 encoder generates a digital signal by means of pulsecode modulation (PCM), which is transmitted to the receiver head via an induction winding around the shaft. From there, the signal is sent via cable to the receiver unit. The maximum distance between the transmitter coil and the receiver/power supply head is up to 35 mm.

Receiver unit

The receiver unit provides an analog output (+/- 10 V) on the front side as standard and can also be equipped with a current loop (4 … 20 mA). An automatic zero adjustment (auto-zero) can be triggered by pressing the AZ button on the front of the receiver.

Examples from the field

Examples from the field

Dx – modular telemetry system

MTP-NT – inductive transmission

CTP-NT-Rotate – compact radio telemetry

TEL 1 –12 bit single channel telemetry

TEL1-Flex – bendable single channel telemetry

© document.write(new Date().getFullYear()); imc Test & Measurement GmbH. All rights reserved.

Spesifikasi

channels1
signal bandwidth0 – 1200 Hz
input typesstrain gauges, PT100
resolution16 Bit
transmissioninductive
power supplyinductive
housingrobust and water resistant
operating temperature-40 … +85 °C
transmitter weight13 g
transmitter dimensions35 x 24 x 14 mm

Unduhan & Sumber

Butuh konsultasi teknis?

Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.

Produk Terkait

Referensi

https://www.imc-tm.com/products/sensor-solutions/telemetry/t1

Scroll to Top
WhatsApp