Tektronix
Tektronix High Voltage Probes: Single-Ended | Probe Tegangan Tinggi Single-Ended
Choose Tektronix High Voltage Probes for safe and accurate measurements of ground referenced signals. Find the right High Voltage Probe for your needs.
Available models include P5122, P5100A, TPP0850, P6015A.
A high voltage single-ended probe is typically used for measuring ground referenced signals up to 40 kV. However, some single-ended probes are designed for oscilloscopes with isolated or floating inputs for measurements that are not ground referenced. Users should select probes with a low input capacitance specification (< 4 pF) to minimize the probe’s loading effect on the circuit because a probe with lower input capacitance will offer higher input impedance at higher frequencies.
Model & Varian
| Model | Bandwidth | Input Impedance | Maximum Voltage |
|---|---|---|---|
| P5122 | 200 MHz | 100 MΩ || 4 pF | RMS: 1000 V CAT II |
| P5100A | 500 MHz | 40 MΩ || 2.5 pF | Peak: 2.5 kVRMS: 1000 V CAT II |
| TPP0850 | 800 MHz | 40 MΩ || 1.8 pF | Peak: 2.5 kV RMS: 1000 V CAT II |
| P6015A | 75 MHz | 100 MΩ || 3 pF | Peak: 40 kVRMS: 15 kV DC |
Geser tabel ke samping untuk melihat semua spesifikasi →
Spesifikasi
| Model & Series | High Voltage Probe: Single-Ended |
|---|---|
| Bandwidth | 75 MHz to 800 MHz (model-dependent) |
| Input Impedance | 40 MΩ to 100 MΩ (model-dependent) |
| Input Capacitance | 1.8 pF to 4 pF (model-dependent) |
| Maximum Voltage | 1000 V |
Unduhan & Sumber
Butuh konsultasi teknis?
Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.
Produk Terkait
Referensi
https://www.tek.com/en/products/oscilloscopes/oscilloscope-probes/high-voltage-probe-single-ended