Tektronix

Tektronix TCP0020/TCP2020 AC/DC Current Probe 20 A | Probe Arus

The TCP0020, TCP2020, and TCP202A are a family of high-performance, easy-to-use AC/DC current probes designed for use with a variety of oscilloscopes.

Available models include TCP0020, TCP2020.

Konsultasi via WhatsApp via Email

Tektronix TCP0020/TCP2020 AC/DC Current Probe 20 A

The TCP0020, TCP2020, and TCP202A are a family of high-performance, easy-to-use AC/DC current probes designed for use with a variety of oscilloscopes. The TCP0020 is designed for direct connection to oscilloscopes with the TekVPI™ probe interface and the TCP202A is designed for direct connection to oscilloscopes with the TekProbe™ probe interface. The TCP2020 is designed for use with any instrument with BNC inputs and >100 kΩ input termination.

These AC/DC current probes provide sufficient performance to support 50 MHz measurement system bandwidth. The TCP0020 and TCP2020 provide a maximum 20 ARMS measurement range, while the TCP202A provides a maximum 15 ADC + Peak AC measurement range. These probes also provide excellent accuracy to current levels as low as 10 mA, important for meeting today’s challenging current measurement needs.

Key Features

Easy-to-use and accurate AC/DC current measurements
DC to >50 MHz bandwidth
Core jaw diameter of 5 mm (0.2 in.)
Accurately measures current levels as low as 10 mA per division
High accuracy with typically less than 1% DC gain error
Split-core construction allows easy circuit connection
Low noise and DC drift
Safety Certified
TCP0020 – 20 ARMS maximum current capability
TCP0020 – 100 A peak pulse current capability
TCP0020 – Connects directly to oscilloscopes with the TekVPI™ probe interface
TCP0020 – Provides automatic units scaling and readout on the oscilloscope display
TCP0020 – One-button degauss and AutoZero control for ease of use
TCP0020 – Easy access to scope-displayed probe menu for probe setup control and operating status information
TCP0020 – Remote control capability through TekVPI oscilloscope
TCP2020 – 20 ARMS maximum current capability
TCP2020 – 100 A peak pulse current capability
TCP2020 – 10 mA/mV sensitivity
TCP2020 – BNC output connects to most oscilloscopes and other measurement equipment (>100 kΩ termination required)
TCP2020 – Degauss button and thumbwheel for DC offset adjustment
TCP2020 – Powered by an AC adapter
TCP202A – 15 ADC + Peak AC maximum current capability
TCP202A – 50 A peak pulse current capability
TCP202A – Connects directly to oscilloscopes with the TekProbe™ interface
TCP202A – Provides automatic units scaling and readout on the oscilloscope display
TCP202A – Degauss button and thumbwheel for DC offset adjustment

Model & Varian

Perbandingan Model & Varian
Model	Maximum Current	Minimum Current	Bandwidth	Rise Time
TCP0020	DC: 20 AMax RMS: 20 APeak Current: 100 A	10 mA	50 MHz	< 7 ns
TCP2020	20 A RMS, 100 A Peak Pulse	10 mA	50 MHz	≤7 ns

Geser tabel ke samping untuk melihat semua spesifikasi →

Spesifikasi

General
Bandwidth	DC to ≥50 MHz
Rise time	20 ARMS (TCP0020 and TCP2020); 15 ADC + Peak AC (TCP202A)
Max peak pulse current	100 A (TCP0020 and TCP2020); 50 A (TCP202A)
Maximum sensitivity	10 mA (on oscilloscopes that support 1 mV/div setting)
Max bare-wire voltage	150 V CAT II (300 V CAT II insulated wire)
Typical
DC accuracy	±1% typical, ±3% warranted
Max amp-secon product	1000 Aμs (TCP0020 and TCP2020); 500 Aμs (TCP202A)
Insertion impedance	0.036 Ω at 1 MHz; 0.117 Ω at 10 MHz; 0.54 Ω at 50 MHz
Signal delay	17 ns
Environmental
Temperature, Operating	0 °C to +50 °C
Temperature, Non-operating	–40 °C to +75 °C
Humidity, Operating	5% to 95% RH, tested up to +30 °C (+86 °F); 5% to 85% RH, tested at +30 °C to +50 °C (+86 °F to +122 °F)
Humidity, Non-operating	5% to 95% RH, tested up to +30 °C (+86 °F); 5% to 85% RH, tested at +30 °C to +75 °C (+86 °F to +167 °F)
Regulatory, Safety	CSA1010.1:1997, CSA1010.2.032-96, IEC61010-1:2001, IEC61010-2-032
Physical characteristics
Probe head size, Height	30.5 mm (1.2 in.)
Probe head size, Width	15.2 mm (0.6 in.)
Probe head size, Length	148 mm (5.8 in.)
Probe head size, Cable length	2 mm; 79 in.
Weight, Probe only	0.227 kg (0.5 lb.)
Weight, Shipping	1.22 kg (2 lb. 11 oz.)
Power requirements	TCP0020 is powered directly by oscilloscopes with the TekVPI™ probe interface. TCP2020 is powered by AC adapter. (Specify power plug option when ordering.) TCP202A is powered directly by oscilloscopes with the TekProbe™ probe interface or through the TekVPI™ probe interface when used with the TPA-BNC adapter.
Standard warranty	One-year parts and labor.