Tektronix

Tektronix TCP0150 AC/DC Current Probe 150 A 20 MHz TekVPI | Probe Arus

The TCP0150 is a high performance and easy-to-use 150 A AC/DC current probe providing 20 MHz of frequency bandwidth with selectable 25 A and 150 A measurement ranges.

Konsultasi via WhatsApp via Email

Tektronix TCP0150 AC/DC Current Probe 150 A 20 MHz TekVPI

The TCP0150 is a high performance and easy-to-use 150 A AC/DC current probe designed for use and direct connection to the TekVPI™ probe interface.

This AC/DC current measurement probe provides 20 MHz of frequency bandwidth with selectable range control for 25 A and 150 A measurement ranges. It also provides low-current measurement capability and accuracy to current levels as low as 5 mA per division — important for achieving broad dynamic current range of high-level and low-level measurement signals.

Key Features

Easy-to-Use and accurate AC/DC current measurements
Connects directly to oscilloscopes with the TekVPI™ probe interface
Low noise and DC drift
Provides automatic units scaling and readout on the oscilloscope’s display
Remote GPIB/USB probe control through the oscilloscope
Split-core probe head construction allows easy connection to conductors
Easy to degauss and autozero

Spesifikasi

Warranted characteristics
Bandwidth	DC to ≥20 MHz (-3 dB). Derate with frequency. See Figure 1. (Calculated from Rise Time BW = .35/Rise Time)
Rise time	≤17.5 ns
Max RMS current	150 A
Max peak pulse current	500 A
Minimum sensitivity	5 mA (on oscilloscope's 1 mV/div setting); AC coupling (on oscilloscopes that support AC/DC coupling)
Current ranges	25 A and 150 A
Max bare-wire voltage	600 VRMS CAT I and II; 300 VRMS CAT III
Typical characteristics
DC accuracy	±1% typical (3% warranted)
Max amp-second product, 25 A range	3,000 Aμs
Max amp-second product, 150 A range	15,000 Aμs
Insertion impedance	0.03 Ω at 1 MHz; 0.075 Ω at 5 MHz; 0.125 at 10 MHz; 0.3 at 20 MHz
Signal delay	≈ 21 ns
Displayed RMS noise	≤500 μARMS (probe only)
Physical characteristics
Cable length	2 m (79 in.)
Probe head size, Length	26.8 cm (10.55 in.)
Probe head size, Width	4.1 cm (1.6 in.)
Probe head size, Height	15.6 cm (6.13 in.)
Probe head size, Max conductor diameter	21 mm x 25 mm (0.83 in. x 1.0 in.)
Probe head size, Shipping weight	0.7865 kg (1.734 lb.)
Probe head size, Power requirements	TCP0150 is powered directly by oscilloscopes with the TekVPI interface
Environmental
Temperature, Operating	0 ºC to +50 ºC
Temperature, Nonoperating	-40 ºC to +75 ºC
Humidity, Operating	5% to 95% RH (Relative humidity) at up to +30 ºC; 5% to 85% RH above 30 ºC up to +50 ºC, noncondensing
Humidity, Nonoperating	5% to 95% RH (Relative humidity) at up to +30 ºC; 5% to 85% RH above 30 ºC up to +75 ºC, noncondensing
Altitude, Operating	Up to 2,000 m (6,560 feet)
Altitude, Nonoperating	Up to 12,000 m (40,000 feet)
Recommended oscilloscopes	Oscilloscopes with the TekVPI probe interface.