Pmod BT2: Bluetooth Interface

Please note: The Pmod BT2 is no longer available outside of the USA and Canada. 
The Pmod BT2 is a powerful peripheral module employing the Roving Networks® RN-42 to create a fully integrated Bluetooth interface. Users can communicate with the chip via UART and can also use the secondary SPI header on the board for updating the RN-42 firmware if needed.
Note: The Pmod BT2 is also featured in a fantastic product bundle, the Zybo Pmod Pack! This bundle was designed to expand project possibilities by utilizing a variety of peripheral modules perfectly suited for the Zybo Zynq-7000 FPGA.
To view our EMC Disclaimer, click here.

Bluetooth 2.1/2.0/1.2/1.0 compatible
Add wireless capability with this low power, Class 2 Bluetooth radio
Supports HID profile for making accessories such as pointing devices, etc.
Secure communications, 128-bit encryption
Six different modes
Small PCB size for flexible designs 1.5“ × 0.8” (3.8 cm × 2.0 cm)
12-pin Pmod connector with UART interface

Pmod BT2
Custom antistatic Pmod packaging

Quickly find what you need to get started and reduce mean time to blink.
All product support including documentation, projects, and the Digilent Forum can be accessed through the product resource center.
Resource Center
Quick Links
Reference ManualSchematic

Aplikasi & Use Case: Pmod BT2: Bluetooth Interface memberikan kemudahan ekspansi antarmuka sensor dan akuisisi sinyal pada papan pengembang FPGA maupun mikrokontroler untuk integrasi sistem kendali industri dan prototyping IoT.