Keysight Power Meter & Sensor
Keysight Power Meter — Seri P, EPM & E-Series Sensor
Power meter Keysight (P-Series, EPM Series) bersama sensor E-Series memberikan pengukuran daya rata-rata dan peak/average presisi untuk aplikasi RF, radar, dan komunikasi.
Spesifikasi Utama
- Frequency range9 kHz to 110 GHz
- Video bandwidth30 MHz
- Dynamic range-70 to +44 dBm
- Number of channels1
Gambaran Umum
Power meter Keysight (P-Series, EPM Series) bersama sensor E-Series memberikan pengukuran daya rata-rata dan peak/average presisi untuk aplikasi RF, radar, dan komunikasi.
Spesifikasi
| Frequency range | 9 kHz to 110 GHz |
| Video bandwidth | 30 MHz |
| Dynamic range | -70 to +44 dBm |
| Number of channels | 1 |
| Peak frequency range | 50 MHz to 50 GHz |
| Peak dynamic range | -35 to +20 dBm |
| Number of channels | 2 |
| Frequency range | DC to 120 GHz |
| Number of channels | 1 to 4 |
| Measurement type | Average/CW only |
| Connector type | Type-N |
| Frequency range | 10 MHz to 18 GHz |
| Maximum power | 20 dBm (100 mW) |
| Power range | -35 dBm (316.23 nW) to +20 dBm (100 mW) |
| Frequency range | 100 kHz to 6 GHz |
| Power range | -35 to +20 dBm |
| Connector type | 3.5 mm |
| Frequency range | 10 MHz to 26.5 GHz |
| Frequency range | 50 MHz to 50 GHz |
| Connector type | 2.4 mm |
| Varian dalam seri | N1911A, N1912A, N1913A, N1914A, N8481A, N8482A, N8485A, N8487A, E4418B, E4419B |
Aplikasi
Keysight Keysight Power Meter Series — aplikasi utama dari pabrikan:
When used with the N192XA wideband power sensors, the N1911/12A P-Series power meter provides a measurement frequency range from 50 MHz to 40 GHz with an internal zero and calibration capability.
When used with the N192XA wideband power sensors, the N1911/12A P-Series power meter provides a measurement frequency range from 50 MHz to 40 GHz with an internal zero and calibration capability.
- 30 MHz video bandwidth
- Single-shot real-time capture at 100 Msamples/sec
- Key Measurements: peak, average, peak-to-average ratio, rise time, fall time, and pulse width
- 22 Predefined formats: WiMAX, DME, HSDPA, etc.
- One screen view for pulse measurement analysis: Auto Scale, Auto Gate, Rise/Fall Time, Duty Cycle, etc.
- Internal Zeroing and Calibration while connecting to the DUT
- Your instrument can be controlled at no additional cost using the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). This app simplifies instrument connection and control. Download the BenchVue Basic Power Meter/Sensor App (BV0007B) . Note that the basic version does not include KeysightCare support and is one revision behind the licensed version. For access to the latest features and support, the licensed (paid) version of the BenchVue Power Meter/Sensor Control and Analysis App is available.
- LXI-C Compliance
As signals become more complex, it becomes more difficult to make fast, accurate power measurements.
As signals become more complex, it becomes more difficult to make fast, accurate power measurements. For years, you’ve depended on Keysight’s EPM Series power meters. Today, the Keysight N1913A EPM Series power meter is a versatile, user-friendly replacement for the…
- Frequency range of DC to 120 GHz (sensor dependent)
- Wide dynamic range of -70 to +44 dBm (sensor dependent)
- Go beyond GPIB with LAN LXI-C and USB connectivity
- Code-compatible with E4418/19B power meters* and 436A/37B/38A power meters (option 200)
- Increased measurement channels: up to three channels with two additional U2000/U8480 Series or U2050 X-Series USB power sensors connected using the optional USB hosts
- Automated frequency/power sweep measurements with the optional external trigger in/out feature
- Your instrument now comes with the BenchVue Basic Power Meter/Sensor Control and Analysis App (BV0007B). The BenchVue software simplifies the process of connecting, controlling instruments, and automating test sequences. Download the BenchVue Basic App (BV0007B) for free to efficiently manage your power meter/sensor instruments
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility.
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters. Note: All N8480 series power sensors are…
- Wide frequency range from 10 MHz to 18 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Model & Varian
Keysight Power Meter Series — pilih model yang sesuai, minta penawaran via WhatsApp.
| Model | Frequency range | |
|---|---|---|
| N1911A | 9 kHz to 110 GHz | Tanya Harga |
| N1912A | 9 kHz to 110 GHz | Tanya Harga |
| N1913A | DC to 120 GHz | Tanya Harga |
| N1914A | – | Tanya Harga |
| N8481A | 10 MHz to 18 GHz | Tanya Harga |
| N8482A | 100 kHz to 6 GHz | Tanya Harga |
| N8485A | 10 MHz to 26.5 GHz | Tanya Harga |
| N8487A | 50 MHz to 50 GHz | Tanya Harga |
| E4418B | – | Tanya Harga |
| E4419B | – | Tanya Harga |
Produk Terkait
Butuh Penawaran?
Kirim kebutuhan Anda — tim kami merespons cepat pada jam kerja (Senin–Jumat, 08.30–17.30 WIB).