Keysight Spectrum Analyzer & RF
Keysight X-Series Signal Analyzer — CXA/EXA/PXA/UXA
Keysight X-Series Signal Analyzer · Spectrum Analyzer & RF
Spesifikasi Utama
- DANL @1 GHz-163 dBm
- Maximum analysis bandwidth25 MHz
- Phase noise @1 GHz (10 kHz offset)-110 dBc/Hz
- Maximum frequency26.5 GHz
- Real Time Spectrum AnalysisNo
- Maximum analysis bandwidth40 MHz
Gambaran Umum
Lini X-Series menyediakan signal analyzer dari entry-level hingga flagships: CXA, EXA, PXA, dan UXA — dengan kemampuan real-time spectrum analysis, DANL sangat rendah, dan fleksibilitas aplikasi pengukuran PathWave untuk pengujian RF dan microwave modern.
Spesifikasi
| DANL @1 GHz | -163 dBm |
| Maximum analysis bandwidth | 25 MHz |
| Phase noise @1 GHz (10 kHz offset) | -110 dBc/Hz |
| Maximum frequency | 26.5 GHz |
| Real Time Spectrum Analysis | No |
| Maximum analysis bandwidth | 40 MHz |
| DANL @1 GHz | -165 dBm |
| Phase noise @1 GHz (10 kHz offset) | -109 dBc/Hz |
| Maximum frequency | 44 GHz |
| DANL @1 GHz | -166 dBm |
| Maximum analysis bandwidth | 510 MHz |
| Phase noise @1 GHz (10 kHz offset) | -136 dBc/Hz |
| Maximum frequency | 50 GHz |
| Real Time Spectrum Analysis | Yes |
| Maximum analysis bandwidth | 1 GHz |
| Phase noise @1 GHz (10 kHz offset) | -135 dBc/Hz |
| Varian dalam seri | N9000B, N9010B, N9030B, N9040B |
Aplikasi
Keysight Keysight X-Series Signal Analyzer — aplikasi utama dari pabrikan:
Design, Test, and Educate with an Intuitive and Cost-Effective Signal Analyzer
Engineering is all about connecting ideas and solving problems. The accessible performance of the CXA signal analyzer is today’s leading cost-effective tool for essential signal characterization. Its capabilities provide a solid foundation for testing in general-purpose and educational applications. Find…
- See more with a wide frequency range of 9 kHz to 26.5 GHz with up to 25 MHz analysis bandwidth
- Add dependable signal analysis to manual and automated manufacturing test systems
- Perform essential measurements such as spur searches and distortion analysis
- Make stimulus-response measurements with the optional built-in tracking generator
- Add crucial functionality with X-Series measurement applications, such as noise figure, custom digital demodulation and IoT signal analysis
- Capture and analysis radiated EMI emissions with N9311X-100 near-field probes
Fast, Flexible General-Purpose Signal Analysis up to 44 GHz Frequency
When enhancing a product and improving test throughput, your general-purpose signal analyzer should be ready for a wide bandwidth range of challenging requirements. The fast, flexible N9010B EXA Signal Analyzer addresses diverse needs with a solid mix of speed and…
- See more with a wide bandwidth range of 10 Hz to 44 GHz with up to 40 MHz frequency
- Save test time in your spurious response measurements with the fast sweep capability
- Get the most cost-effective signal analysis for mmWave testing
- Measure small signals in the presence of large ones with level accuracy, displayed average noise level (DANL), and third order intermodulation (TOI) distortion
- Perform power measurements quickly at discrete frequency points with list-sweep mode
- Simplify testing with PathWave X-Series measurement applications
Benchmark Performance in Signal Analysis
PXA signal analyzers are ideally suited for high-performance research and development (R&D) applications in aerospace/defense and commercial wireless communications. The PXA analyzes signals over wider bandwidths, reduces measurement uncertainty, and reveals previously hidden signals with noise floor extension (NFE). Unravel…
- Analyze more with a wide frequency range of 2 Hz to 50 GHz with up to 510 MHz analysis bandwidth
- See small signals in the presence of large ones with up to 75 dB of spurious-free dynamic range (SFDR)
- Extend the frequency up to 110 GHz with Keysight smart mixers
- Record, analyze, and simulate real-world scenarios with gap-free streaming up to 255 MHz
- Capture transient or intermittent signals with optional real-time spectrum analysis capabilities
- Meet stringent data security requirements with a removable solid-state drive and other optional features
See the Real Performance of Your Design
The ultimate performance of our UXA signal analyzers lets you characterize today’s most challenging signals — fast-hopping, wideband, transient — in 5G, 802.11ax/ay, satellite, radar, electronic warfare, and more. You will be able to fully understand the purity of your…
- Get wider (up to 1 GHz), deeper views of your most challenging signals
- Measure the spectral purity of your design with industry-leading phase noise and 78 dBc spurious-free dynamic range across 510 MHz bandwidth
- Extend RF input frequency up to 110 GHz with Keysight smart mixers and up to terahertz frequencies with third- party solutions
- Capture intermittent signals with gap-free, real-time spectrum analysis
- Capture lower-level spurious signals with an improved DANL low noise path
- See more and take your design farther with the 14.1-inch screen
Model & Varian
Keysight X-Series Signal Analyzer — pilih model yang sesuai, minta penawaran via WhatsApp.
| Model | DANL @1 GHz | Maximum analysis bandwidth | Phase noise @1 GHz (10 kHz offset) | Maximum frequency | Real Time Spectrum Analysis | |
|---|---|---|---|---|---|---|
| N9000B | -163 dBm | 25 MHz | -110 dBc/Hz | 26.5 GHz | No | Tanya Harga |
| N9010B | -165 dBm | 40 MHz | -109 dBc/Hz | 44 GHz | No | Tanya Harga |
| N9030B | -166 dBm | 510 MHz | -136 dBc/Hz | 50 GHz | Yes | Tanya Harga |
| N9040B | -166 dBm | 1 GHz | -135 dBc/Hz | 50 GHz | Yes | Tanya Harga |
Produk Terkait
Butuh Penawaran?
Kirim kebutuhan Anda — tim kami merespons cepat pada jam kerja (Senin–Jumat, 08.30–17.30 WIB).