PCB Piezotronics
PCB Piezotronics 422exx Series In-Line Charge Converter
Model 422E35:In-line charge converter, 1 mV/pC, +/-2.5V output, -5% frequency 5 Hz, for high temp sensors
Available models include 422E35, 422E36.
Model 422E35:In-line charge converter, 1 mV/pC, +/-2.5V output, -5% frequency 5 Hz, for high temp sensors
This series includes the official PCB Piezotronics models listed below.
Key Features
Model 422E35:In-line charge converter, 1 mV/pC, +/-2.5V output, -5% frequency 5 Hz, for high temp sensors
- Sensitivity: (±2%)1 mV/pC
- Output Voltage: ±2.5 V
- Temperature Range: -65 to +250 °F (-54 to +121 °C)
- Housing Material: Stainless Steel
Model & Varian
| Model | Sensitivity (±2 %) (Charge Conversion) | Input Range | Low Frequency Response (-5 %) | High Frequency Response (2.2 mA) | High Frequency Response (4 mA) | High Frequency Response (20 mA) | Non-Linearity | Temperature Range (Operating) |
|---|---|---|---|---|---|---|---|---|
| 422E35 | 1 mV/pC | ±2500 pC | 5 Hz / [2] | 30 kHz / [1] | 60 kHz / [1] | 100 kHz / [1] | ≤1.0 % FS | -65 to +250 °F / -54 to +121 °C |
| 422E36 | 10 mV/pC | ±250 pC | 5 Hz / [2] | 50 kHz / [1] | 75 kHz / [1] | 100 kHz / [1] | ≤1.0 % FS | -65 to +250 °F / -54 to +121 °C |
Geser tabel ke samping untuk melihat semua spesifikasi →
Spesifikasi
| Sensitivity (±2 %) (Charge Conversion) | 1 mV/pC |
|---|---|
| Input Range | ±2500 pC |
| Low Frequency Response (-5 %) | 5 Hz / [2] |
| High Frequency Response (2.2 mA) | 30 kHz / [1] |
| High Frequency Response (4 mA) | 60 kHz / [1] |
| High Frequency Response (20 mA) | 100 kHz / [1] |
| Non-Linearity | ≤1.0 % FS |
| Temperature Range (Operating) | -65 to +250 °F / -54 to +121 °C |
| Maximum Shock | 1000 g pk / 9810 m/s² pk |
| Humidity Range | 100 % |
| Excitation Voltage | +18 to 28 VDC |
| Constant Current Excitation | 2.2 to 20 mA |
| Output Voltage (at specified measurement range) | ±2.5 V |
| Output Bias Voltage | +12.00 to 15.00 VDC |
Unduhan & Sumber
Butuh konsultasi teknis?
Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.
