PCB Piezotronics
PCB Piezotronics 443B102 Dual Mode Charge Amplifier
PCB Piezotronics · Signal Conditioner
Model 443B102:1-channel module only, dual-mode charge amplifier
Key Features
Model 443B102:1-channel module only, dual-mode charge amplifier
- Sensor Input Type(s): ICP®, Charge
- Power Required: +15 at 230 mA
Spesifikasi
| Sensor Input Type(s) | ICP®, Charge |
|---|---|
| Voltage Gain Increment | 0.1-1000 |
| Accuracy(ICP®/ Voltage Input) | ±0.5 % |
| Accuracy(Charge Input) | ±0.5 % |
| Sensitivity (ICP®/Voltage) | .001 to 9.999 mV/unit / [2] |
| Sensitivity (Charge Input) | 0.0001 to 10 V/pC |
| Input Range(maximum) (Charge Input) | 100000 pC / [1] |
| Low Frequency Response (-10 %) | 2.0 Hz ±20 % |
| Low Frequency Response (10 %) (Velocity) | 1.0 Hz ±5 % |
| Low Frequency Response (10 %) (Displacement) | 1.0 Hz ±5 % |
| High Frequency Response (-10 %) | 200 kHz ±5 % |
| Electrical Filter Roll-off | 80 dB/decade |
| Filter Type (4-pole Butterworth) | Low Pass |
| Fault/Bias Monitor LEDS | Fault/Overload |
| Digital Control Interface | RS-485 / [4] |
Unduhan & Sumber
Butuh konsultasi teknis?
Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.
