Keysight
Keysight U1733C Handheld LCR Meter, 100 Hz–100 kHz | LCR Meter Genggam
Handheld LCR meter with test frequencies up to 100 kHz, measuring Z, L, C, R, D, Q, phase angle and ESR, plus DC resistance.
Available models include U1731C, U1732C, U1733C.

The Keysight Technologies, Inc. U1730C Series handheld LCR meters allow you to measure at frequencies as high as 100 kHz—a capability typically found only in benchtop meters.
Fitur Utama:
- 20,000 counts resolution
- 0.2% basic accuracy
- Wide LCR ranges with three to five selectable test frequencies (up to 100 kHz for U1733C)
- Auto identification (Ai) automatically determines and displays component type and measurements
- Detailed component analysis with DCR, ESR, Z, D, Q, and θ functions
- Battery life of 16 hours/AC-powered
- IR-to-USB connectivity for data logging to PC
Model & Varian
| Model | Maximum test frequency | DCR |
|---|---|---|
| U1731C | Up to 1 kHz | No |
| U1732C | Up to 10 kHz | No |
| U1733C | Up to 100 kHz | Yes |
Geser tabel ke samping untuk melihat semua spesifikasi →
Spesifikasi
| Measurements | Z/L/C/R/D/Q/θ/ESR/DCR |
|---|---|
| Display | Primary display: Maximum display 19,999 counts; Secondary display: Maximum display 999 counts |
| Test frequency | 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz |
| Test signal level | 0.74 Vrms at 100 Hz, 120 Hz, 1 kHz; 0.70 Vrms at 10 kHz and 100 kHz |
| DCR | +1.235 V |
| Tolerance mode | 1%, 5%, 10%, 20% |
| Ranging mode | Auto and manual |
| Measurement rate | 1 time/second, nominal |
| Response time | Approximately 1 second/DUT (Device Under Test) |
| Power supply | Single standard 9 V battery or optional power adaptor |
| Battery life | 16 hours based on alkaline battery |
| Operating temperature | –10 to 55 °C |
| Storage temperature | –20 to 70 °C, 0 to 80% R.H. without battery |
| Relative humidity | Maximum 80% R.H. for temperature up to 30 °C decreasing linearly to 50% R.H. at 55 °C |
| Weight | 337 grams with battery |
| Dimensions (H x W x D) | 184 mm x 87 mm x 41 mm |
| Calibration | One-year calibration cycle recommended |
| Warranty | 3 years for main unit; 3 months for standard shipped accessories |
Unduhan & Sumber
Butuh konsultasi teknis?
Kirim kebutuhan pengujian Anda — tim Terastek membantu menentukan konfigurasi yang sesuai.




